header
张凯

发布于:2018-03-20 星期二 23:01:24 点击数:6454

暂无信息

基本信息

zk.jpg

姓名:张凯             

性别: 男 

出生年月:1987.9       

民族:汉族

学 历:博士            

通讯地址:湖南·长沙·岳麓

E-mail: kzhang@hnu.edu.cn


教育背景

2017年3月,西安交通大学,机械工程学院,工学博士


工作履历

2017年4月—至今,湖南大学,机械与运载工程学院 助理教授/硕士生导师

研究领域

主要从事气悬浮、超声检测、声能采集等领域的学术研究。主持国家重点研发计划子课题1项、航空航天联合开发课题1项、国家自然科学基金项目1项、湖南省自然科学基金1项,参与国家重点研发计划课题、国家自然科学基金等近10项。发表SCI/EI 高水平学术论文20余篇,申请发明专利7项。目前为多个国际SCI期刊审稿人。培养的学生获得湖南省优秀毕业研究生,开发出国内首款最高转速为15万转/分钟的氢燃料电池空压机等。

科研项目

1.新型******关键技术及验证,航空航天联合开发课题,201万,2020-2021,主持

2.磁气混合轴承耦合作用机理及结构融合设计,国家重点研发计划子课题,32万,2019-2022,主持

3.塑料瓦推力轴承膜厚和形变分布超声同步检测方法研究,国家自然科学基金,28万, 2018-2020,主持

4.基于超声原理的塑料瓦推力轴承膜厚和形变分布同步检测方法研究,湖南省自然科学基金,5万,2018-2020,主持

5.基于超声原理的轴承润滑膜厚度检测方法研究,中央高校基本科研业务费项目,25万,2017-2022,主持

6.高DN 值极端温度工况下箔片动压轴承服役特性,国家重点研发计划课题,278万,2019-2022,项目骨干

7.超临界二氧化碳动力系统用主动/智能气体轴承技术研究,装备预研教育部联合基金,100万,2019-2020年,参与

8.气体动压轴承主动化智能化及其支承转子动力学分析与控制,国家自然科学基金,65万,2019-2022,参与

学术成果

1.Kai Zhang, Ying Wang, Xu Ye, Kai Feng, et al. Broadband low frequency acoustic energy harvesting amplified by sonic crystal metamaterial with double defects, Energy, (revised)

2.Minghui Shi, Kai Feng, Kai Zhang*, et al. Experimental and numerical investigation of a self-adapting non-contact ultrasonic motor, Tribology International.( under review)

3.Kai Zhang, Yulu Lei, Kai Feng, Yuanlong Cao. Nonlinear Dynamic Performance of Flexure Pivot Tilting Pad Foil Bearing System. Nonlinear Dynamic. (submitted)

4.Peng Lyu, Kai Feng, Kai Zhang*, et al. The Performance Evaluation of the Promising High-stability Foil Bearing with Flexure Pivot Tilting Pads. Mechanical Systems and Signal Processing, 2019, (SCI ) 

5.Yuanlong Cao, Ke Yu, Kai Zhang*, etal. Analytical solution of squeeze film and thermoelastic damping in bulk resonators. Sensors and Actuators A: Physical, 2019, (SCI)

6.Zhang Kai, Feng Kai, et al. An ultrasonic measurement method for full range of oil film thickness, Part J: Journal of Engineering Tribology, 2019. (SCI)

7.Zhang Kai, Meng Qingfeng, Geng Tao, et al. Ultrasonic measurement of lubricant film thickness in sliding Bearings with overlapped echoes[J]. Tribology International, 2015, 88: 89-94.(SCI; EI)

8.Zhang Kai, Meng Qingfeng, Chen Wei, et al. Ultrasonic measurement of oil film thickness between the roller and the inner raceway in a roller bearing[J]. Industrial Lubrication and Tribology, 2015, 67 (6): 531-537.(SCI;EI)

9.Zhang Kai, Wu Tonghai, Meng Qinghu, et al. Ultrasonic measurement of oil film thickness using piezoelectric element[J]. International Journal of Advanced Manufacturing Technology. 2017, (SCI;EI)

10.Zhang Kai, Wu Tonghai, Duan Zhihe, et al. An adaptive approach for recovering overlapping echoes in ultrasonic oil film thickness measurement of thrust bearings[J]. Industrial Lubrication and Tribology.2017, (SCI;EI)

11.Kai Feng, Youquan Zhu, Kai Zhang. Influences of Structural Parameters and Materials on the Kinetic Characteristics of Networks Actuator. International Journal of Smart Engineering, 2018,( in press).

12.Zhang Kai, Meng Qingfeng, Zhao Wei. Measurement of oil film thickness in cylindrical roller bearing by ultrasound [C]. ASME 12th Biennial Conference on Engineering Systems Design and Analysis, Copenhagen,Denmark, 2014.(EI)

13.Zhang Kai, Wu Tonghai, Dou Pan, et al. Measurement of lubrication film thickness of titling-pad thrust bearing by ultrasonic methods[C].( WTC2017)

14.Zhang Kai, Deng Mingwei, Zhang Tao, Feng kai. Experimental study of the effect of the base movementon the foil bearing-rotor system stability[C]. 2019 Rotating Machinery Transmission and Controls Conference RMTC 2019, Beijing, China.

15.Geng Tao, Meng, Qingfeng; Zhang Kai et al. Ultrasonic measurement of lubricant film thickness in sliding bearings with thin liner[J]. Measurement Science and Technology,2014.(SCI;EI)

16.Wang Hongjin, Meng Qingfeng, Zhang Kai. Discussion and experimental verification on the relations of polarization, deformation and induced voltage of piezoelectric material[C]. International Conference on Mechanical and Automation Engineering, 2013. (EI)

17.李映宏,胡小强,张凯*,冯凯. 叠片式气体箔片推力轴承热特性分析[J]. 摩擦学学报. 2019, 39(3):295-303.

18.冯凯,李映宏,张凯*,刘永红等,新型三瓣式径向气体箔片动压轴承热特性分析[J]. 湖南大学学报. 2019.

19.张凯,余可,冯凯等,嵌入弹簧式气体箔片轴承动态特性实验研究[J]. 湖南大学学报. 2019.

20.耿涛,孟庆丰,贾谦,张凯等,薄衬层结构滑动轴承润滑膜厚度的超声检测方法[J]. 西安交通大学学报,2014.(EI:20143600063064)

21.武通海, 张凯, 孟庆虎,孟庆丰,袁小阳等,一种滑动轴承全域润滑膜厚分布的    检测方法[P].中国发明专利,授权号:ZL201310260854.9.

22.孟庆丰,耿涛,张凯,袁小阳.薄衬层结构滑动轴承润滑膜厚度的超声检测方法[P]. 中国发明专利,授权号:201410037924.9.

23.武通海、张凯、陈渭等. 一种滚子轴承接触区润滑膜厚度的超声检测装置及方法[P].中国发明专利,申请号:201710210652.1

24.张凯,王高飞,冯凯等,一种全范围润滑膜厚度超声检测装置及方法[P].中国发明专利,申请号201710376266.X.

25.张凯,朱炳辉,冯凯等,一种基于超声波的空气箔片轴承气膜厚度测量系统与方法[P].中国发明专利,申请号:CN201811473404.7.

26.张凯,雷雨露,王瑛,孙东领,冯凯. 一种塑料瓦推力轴承膜厚及形变分布超声同步检测方法[P].中国发明专利,申请号:2020011800440850.

27.张凯,冯凯,朱杰等.一种新型可监控油膜厚度分布的聚合物推力轴承[P].中国发明专利,申请中