header
HWANG HYEON JONG

发布于:2018-03-12 星期一 09:07:33 点击数:4817

暂无信息

基本信息

- 姓名 : Hwang, Hyeon Jong (黄铉宗)

- 职称 : 副教授

- 出生日期 : 1985.04.18

- 邮箱: hwanggun85@naver.com

- ResearcherID : F-8173-2017

- Scopus Author ID : 54790928900

- ORCID ID : 0000-0002-7757-7540

-学术主页: https://www.researchgate.net/profile/Hyeon_Jong_Hwang




教育背景

2010.3 – 2014.2

Seoul National University, Korea of Republic    国立首尔大学,韩国

Ph.D. in Department of Architecture & Architectural Engineering    建筑工程博士

 

2008.3 – 2010.2

Seoul National University, Korea of Republic    国立首尔大学,韩国

M.S. in Department of Architecture & Architectural Engineering    建筑工程硕士

 

2004.3 – 2008.2

Seoul National University, Korea of Republic    国立首尔大学,韩国

B.S. in Department of Architecture & Architectural Engineering    建筑工程学士

 

工作履历

2017.12 – 至今

副教授

湖南大学,土木工程学院,中国

 

2015.3 – 2017.11

助理教授

湖南大学,土木工程学院,中国

 

2014.3 – 2015.2

副研究员

国立首尔大学,工程研究院,韩国

 

学术兼职

- KCI (韩国混凝土学会) 成员, 2009-至今
- ACI (美国混凝土学会) 成员, 2015-至今
- 编委会成员, Journal of Structural Integrity & Maintenance, 2015-至今
- 翻译委员会委员, English version of Korean Building Code (KBC 2016), 2016-2017

- ACI Committee member : Joint ACI-ASCE Committee 352 (Joints and Connections in Monolithic Concrete Structures) / Joint ACI-ASCE Committee 408 (Bond and Development of Steel Reinforcement) / ACI Committee 318-0L (International Liaison)

- 技术方案(委员会)成员:MCEBM 2017/ ICCEA 2018
- 联合编辑, 湖南大学学报 (EI), 2016-至今
- 审稿员 (SCI journals, 2015-至今): Computers & Concrete / International Journal of Concrete Structures & Materials / Structural Design of Tall & Special Buildings / Structural Engineering  Mechanics / Advances in Materials Science and Engineering / Journal of Civil Engineering & Management / Engineering Structures / Materials & Structures / Structures / Journal of Asian Architecture and Building Engineering / Journal of Earthquake Engineering / Structural Concrete / Journal of Structural Engineering, ASCE / Expert Systems / Advances in Concrete Construction, An International Journal /PLOS ONE / Shock and Vibration

- 审稿员 (EI journals, 2015-至今):  Journal of Korean Association for Spatial Structures / Journal of Structural Integrity  Maintenance / Journal of Korea Concrete Institute / Advances in Computational Design / The Open Civil Engineering Journal / MOJ Civil Engineering / PCI Journal
- 主席:Structures 16/ Structures 18 / ICCEA 2018 / ACSD-EL 2018
- 新期刊适用性评估专家, Taylor & Francis Asia Pacific, 2015
- 审稿员, 第49届全国专利代理人资格考试, 2012

研究领域

- Artificial Intelligence (Machine learning)   人工知能

- Earthquake Engineering of Building Structures    建筑结构抗震

- Reinforced Concrete Design    混凝土结构设计

- Steel-Concrete Composite Design   钢筋-混凝土组合结构设计

- Prefabricated Structures Design   预制结构设计

- Behavior & design of Fiber-Reinforced Concrete (FRC)    纤维增强混凝土(FRC)的性能研究与结构设计

- Behavior & design of Reinforced Geopolymer Concrete   地聚物混凝土的性能研究与结构设计

- Bond mechanism of reinforcement bars    钢筋的粘结机制

- Impact loading & resistance of Reinforced Concrete    钢筋混凝土的抗冲击性能

- Progressive Collapse of Building Structures    建筑结构的抗连续性倒塌研究

- Large-scale experimental testing of structural components & structures   结构或结构构件的大尺寸试验研究

科研项目

Research Projects, 2015 - present (Chief of Research)

研究项目(项目负责人),2015-至今

[1]  Performance-based design for reinforced concrete beam-column joints, Youth program by HNU, 2015.5 – 2020.4.

基于性能的钢筋混凝土梁柱节点设计,湖南大学青年教师成长计划,2015.5-2020.4

[2]  Next generation design for bar development length of high-performance materials, National Natural Science Foundation of China (No. 51650110500), 2017.1 – 2018.12.

高性能材料下钢筋发展长度的延伸设计,国家自然科学基金(No.51650110500),2017.1-2018.12

[3]  Improved bar development length design based on machine learning under various design conditions, National Natural Science Foundation of China (No. 51851110760), 2019.1 – 2020.12.

高性能材料下钢筋发展长度的延伸设计,国家自然科学基金(No.51650110500),2017.1-2018.12


Research Projects, 2015 - present (Co-researcher)

研究项目(联合研究),2015-至今

[1]  Development of the prefabricated column to improve safety & minimize on-site construction, Small & Medium Business Administration in Korea, 2014.10 - 2016.9.

开发预制柱以提高安全性并最大限度的减少现场施工,韩国中小企业管理局,2014.10-2016.9

[2]  Development & evaluation of transfer system of piloti, Hyundai Development Company, 2015.5 - 2015.11.

测点转移系统的开发与评价,韩国现代开发公司,2015.5-2015.11 

[3]  Development of super-prefabricated SRC [S-PSRC] system for foreign plant market, Ministry of Trade, Industry & Resources in Korea, 2015.10 – 2018.9.

为国外市场开发超预制SRC[S-PSRC]系统,韩国工业资源部,2015.10-2018.9

[4]  Technical basic theory of industrialized buildings with prefabricated concrete structure, National Key Research Program of China (2016YFC0701400), 2016.7 – 2019.6.

装配式混凝土工业化建筑技术基础理论,国家重点研发计划(2016YFC0701400),2016.7-2019.6

[5]  Structural monitoring of transfer system of piloti, Hyundai Development Company, 2016.12 - 2017.11

测点转移系统的结构监测,韩国现代开发公司,2016.12-2017.11

[6]  Fundamental research for design of reinforced geopolymer concrete structural components, National Natural Science Foundation of China (No. 51638008), 2017.1 - 2021.12

绿色低碳地聚物混凝土材料和结构设计的基础研究,国家自然科学基金(No.51638008),2017.1-2021.12

[7] Experimental & theoretical research on the seismic anchorage performance of hooked bars in joints of reinforced concrete frame, National Natural Science Foundation of China,2019.1-2022.12

带弯钩钢筋在钢筋混凝土框架节点中的抗震锚固性能试验与理论研究,国家自然科学基金,2019.1-2022.12

学术成果

SCI papers


1.         Park H.G., Hwang H.J., Hong G.H., Kim Y.N., and Kim J.Y.*, “Slab Construction Load Affected by Shore Stiffness and Concrete Cracking”, ACI Structural Journal, Vol. 108, No. 6, 2011. 11, pp.679-688

2.         Park H.G., Hwang H.J.*, Lee C.H., Park C.H., and Lee C.N., “Cyclic Loading Test for Concrete-Filled U-Shaped Steel Beam-RC Column Connections”, Engineering Structures, Vol. 36, 2012. 3, pp.325-336

3.         Park H.G., Hwang H.J., Hong G.H., Kim Y.N., and Kim J.Y.*, “Immediate and Long-Term Deflections of Reinforced Concrete Slabs Affected by Early-Age Loading and Low Temperature”, ACI Structural Journal, Vol. 109, No. 3, 2012. 5, pp.413-422

4.         Lee C.H., Park H.G.*, Park C.H., Hwang H.J., Lee C.N., Kim H.S., and Kim S.B., ”Cyclic Seismic Testing of Composite Concrete-Filled U-Shaped Steel Beam to H-Shaped Column Connections”, Journal of Structural Engineering, ASCE, Vol.139, No.3, 2013. 3, pp.360-378

5.         Eom T.S., Hwang H.J.*, Park H.G., Lee C.N., and Kim H.S., “Flexural Test for Steel-Concrete Composite Members Using Prefabricated Steel Angles”, Journal of Structural Engineering, ASCE, Vol. 140, No. 4, 2014. 4, pp.04013094(12)

6.         Hwang H.J., Park H.G.*, Choi W.S., Chung L., and Kim J.K., “Cyclic Loading Test for Beam-Column Connections with 600 MPa (87 ksi) Beam Flexural Reinforcing Bars”, ACI Structural Journal, Vol.111, No.4, 2014. 7, pp.913-924

7.         Eom T.S., Hwang H.J., and Park H.G.*, “Energy-Based Hysteresis Model for Reinforced Concrete Beam-Column Connections”, ACI Structural Journal, Vol.112, No.2, 2015. 3, pp.157-166

8.         Hwang H.J., Eom T.S.*, and Park H.G., “Design Considerations for Interior RC Beam-Column Joint with Additional Bars”, Engineering Structures, Vol. 98, 2015. 9, pp.1-13

9.         Hwang H.J., Eom T.S.*, Park H.G., Lee S.H., and Kim H.S., “Cyclic Loading Test for Beam-Columns Connections of Concrete-Filled U-Shaped Steel Beams and Concrete-Encased Steel Angle Columns”, Journal of Structural Engineering, ASCE, Vol.141, No.11, 2015. 11, pp.04015020(12)

10.     Hwang H.J., Eom T.S., and Park H.G.*, “Bond-Slip Relationship of Beam Flexural Bars in Interior Beam-Column Joints”, ACI Structural Journal, Vol.112, No.6, 2015. 11, pp.827-837

11.     Eom T.S., Park H.G., Hwang H.J., and Kang S.M.*, “Plastic Hinge Relocation Methods for Emulative PC Beam-Column Connections”, Journal of Structural Engineering, ASCE, Vol.142, No.2, 2016. 2, pp.04015111(13)

12.     Hwang H.J., Eom T.S.*, Park H.G., and Lee S.H., “Axial Load and Cyclic Lateral Load Tests for Composite Columns with Steel Angles”, Journal of Structural Engineering, ASCE, Vol.142, No.5, 2016. 5, pp.04016001(12)

13.     Hwang H.J., Park H.G.*, Hong G.H., Kim J.Y., and Kim Y.N., “Time-Dependent Deflection of Slab Affected by Construction Load”, ACI Structural Journal, Vol.113, No.3, 2016. 5, pp.557-566

14.     Chung L., Lim J.J., Hwang H.J., and Eom T.S.*, “Review of Design Flexural Strengths of Steel-Concrete Composite Beams for Building Structures”, International Journal of Concrete Structures and materials, Vol.10, No.3, 2016. 9, pp.109-121

15.     Park H.G., Baek J.W., Hwang H.J., and Eom T.S.*, “Shear Connector Design of Steel Belt Truss-to-Concrete Mega Column Connection”, ACI Structural Journal, Vol.114, No.2, 2017. 3, pp.499-510

16.     Kim C.S., Lee H.J., Park C.K., Hwang H.J., and Park H.G.*, “Cyclic Loading Test for Concrete-Filled Hollow Precast Concrete Columns Produced by Using a New Fabrication Method”, Journal of Structural Engineering, ASCE, Vol.143, No.4, 2017. 4, pp.04016212(13)

17.     Hwang H.J., Park H.G.*, and Yi W.J., “Nonuniform Bond Stress Distribution Model for Evaluation of Bar Development Length”, ACI Structural Journal, Vol.114, No.4, 2017. 7, pp.839-849

18.     Hwang H.J., Park H.G.*, Hong G.H., Kim G.D., and Choi S.J., “Effect of Steel Fiber for Crack Control in Concrete Slabs with Steel Deck Plates”, ACI Structural Journal, Vol.114, No.4, 2017. 7, pp.851-860

19.     Hwang H.J., Eom T.S., and Park H.G.*, “Shear Strength Degradation Model for Performance-Based Design of Interior Beam-Column Joints”, ACI Structural Journal, Vol.114, No.5, 2017. 9, pp.1143-1154

20.     Hwang H.J., Kim S., and Kang T.H.-K.*, “Energy-Based Penetration Model for Local Impact-Damaged Concrete Members”, ACI Structural Journal, Vol.114, No.5, 2017. 9, pp.1189-1200

21.     Hwang H.J., Park H.G.*, and Yi W.J., “Development Length of Standard Hooked Bar Based on Non-uniform Bond Stress Distribution”, ACI Structural Journal, Vol.114, No.6, 2017. 11, pp.1637-1648

22.     Kim C.S., and Hwang H.J.*, “Numerical Investigation on Load-carrying Capacity of High-strength Concrete-encased Steel Angle Columns”, International Journal of Concrete Structures and Materials, Vol.12, No.1, 2018. 1, pp.(17)

23.     Ma G.*, Li H., and Hwang H.J., “Seismic Behavior of Low-corroded Reinforced Concrete Short Columns in An Over 20-year Building Structure”, Soil Dynamics and Earthquake Engineering, Vol.106, 2018. 3, pp.90-100

24.     Feng F., Jiang K., Hwang H.J.*, and Yi W.J., “Earthquake Response of Low-Rise RC Moment Frame Structures According to Energy Dissipation Ratio of Beam-Column Joints”, Journal of Structural Integrity and Maintenance, Vol.3, No.1, 2018. 3, pp.33-43 (ESCI)

25.     Chen H., Yi W.J.*, and Hwang H.J., “Cracking Strut-and-Tie Model for Shear Strength Evaluation of Reinforced Concrete Deep Beams”, Engineering Structures, Vol.163, 2018. 3, pp.396-408

26.     Yi W.J., Zhou Y.*, Hwang H.J., Cheng Z.J., and Hu X., “Cyclic Loading Test for Circular Reinforced Concrete Columns Subjected to Near-fault Ground Motion”, Soil Dynamics and Earthquake Engineering, Vol.112, 2018. 9, pp.8-17

27.     Wu X., Kang T.H.-K., Lin Y., and Hwang H.J.*, “Shear Strength of Reinforced Concrete Beams with Precast High-Performance Fiber-Reinforced Cementitious Composite Permanent Form”, Composite Structures, Vol.200, 2018. 9, pp.829-838

28.     Li N., Shi C.*, Zhang Z., Zhu D., Hwang H.J., Zhu Y., and Sun T., “A Mixture Proportioning Method for the Development of Performance-based Alkali-activated Slag-based Concrete”, Cement and Concrete Composites, Vol.93, 2018. 10, pp.163-174

29.     Hwang H.J., Park H.G.*, and Yi W.J., “Development Length of Compression Reinforcing Bar Based on Nonuniform Bond Stress Distribution”, ACI Structural Journal, Vol.115, No.6, 2018. 11, pp.1695-1705

30.     Hwang H.J., Ma G., and Kim C.S.*, “Minimum Thickness of Flat Plates Considering Construction Load Effect”, Structural Engineering and Mechanics, Vol.69, No.1, 2019. 1, pp.1-10

31.     Gao Q., Li J.H.*, Qiu Z.J., and Hwang H.J.*, “Cyclic Loading Test for Interior Precast SRC Beam-Column Joints with and without Slab”, Engineering Structures, Vol.182, 2019. 3, pp.1-12

32.     Hwang H.J., Kang T.H.-K.*, and Kim C.S., “Numerical Model for Flexural Behavior of Reinforced Concrete Members Subjected to Low-Velocity Impact Loads”, ACI Structural Journal, Vol.116, No.2, 2019. 3, pp.65-76

33.     Hwang H.J., Park H.G.*, and Yi W.J., “Development Length of Headed Bar Based on Nonuniform Bond Stress Distribution”, ACI Structural Journal, Vol.116, No.2, 2019. 3, pp.29-40

34.     Hwang H.J., and Park H.G.*, “Requirements of Shear Strength and Hoops for Performance-Based Design of Interior Beam-Column Joints”, ACI Structural Journal, Vol.116, No.2, 2019. 3, pp.245-256

35.     Hwang H.J., Zang L., and Ma G.*, “Effect of Impact Loading on Bar Development Length in CCT Node”, Journal of Structural Integrity and Maintenance, Vol.4, No.1, 2019. 3, pp.26-36

36.     Wu X., Yu S., Xue S., Kang T.H.-K., and Hwang H.J.*, “Punching Shear Strength of UHPFRC-RC Composite Flat Plates”, Engineering Structures, Vol.184, 2019. 4, pp.278-286

37.     Wu X., Kang T.H.-K., Xia X., Chen X.K., and Hwang H.J.*, “Behavior and Analysis of Unsymmetrical Double Barrel PC Box Culverts with Post-Tensioning Bars”, Structural Concrete, Vol.20, No.4, 2019. 8, pp.1438-1450

38.     Lee H.J., Park H.G.*, Hwang H.J., and Kim C.S., “Cyclic Lateral Load Test for RC Column-Steel Beam Joints with Simplified Connection Details”, Journal of Structural Engineering, ASCE, Vol.145, No.8, 2019. 8, pp.04019075(12)

39.     Yaseen Z.M., Keshtegar B., Hwang H.J., and, Nehdi M.L.*, “Predicting Reinforcing Bar Development Length Using Polynomial Chaos Expansions”, Engineering Structures, Vol.195, 2019. 9, pp.524-535

40.     Zhang W.X.*, Li B., Hwang H.J.*, Zhang J.Y., Xiao L.J., Yi W.J., and Park H.G., “Punching Shear Strength of Reinforced Concrete Column Footings under Eccentric Compression: Experiment and Analysis”, Engineering Structures, Vol.198, 2019. 11, pp.109509(19)

41.     Hwang H.J., Baek J.W., Kim J.Y., and Kim C.S.*, “Prediction of Bond Performance of Tension Lap Splices Using Artificial Neural Networks”, Engineering Structures, Vol.198, 2019. 11, pp.109535(11)

42.     Zhou Y., Chen T., Pei Y., Hwang H.J.*, Hu X., Yi W.J., and Deng L., “Static Load Test on Progressive Collapse Resistance of Fully Assembled Precast Concrete Frame Structure”, Engineering Structures, Vol.200, 2019. 12, pp.109719(14)

43.     Chen H., Yi W.J.*, Ma Z.J., and Hwang H.J., “Shear Strength of Reinforced Concrete Simple and Continuous DEEP Beams”, ACI Structural Journal (in-press)

44.     Hwang H.J., and Park H.G.*, “Performance-Based Shear Design of Exterior Beam-Column Joints with Standard Hooked Bars”, ACI Structural Journal (in-press)

45.     Zhou Y.*, Zhou Y., Pei Y., Hwang H.J., Zheng P., and Yi W.J., “Effect of An Infill Wall on Linear and Nonlinear Seismic Performance of High-Rise Buildings”, Earthquake Engineering and Engineering Vibration (in-press)

 

International Conferences

As a speaker

1.         Park H.G., Hwang H.J., Kim J.Y., Hong G.H., Im J.H., and Kim Y.N., “Creep and Effective Stiffness of Early Age Concrete Slabs Cured at Low Temperature”, Fracture Mechanics of Concrete and Concrete Structures (Framcos), Jeju, Korea, May, 2010.

2.         Park H.G., Hwang H.J., Kim J.Y., Hong G.H., Im J.H., and Kim Y.N., “Effects of Shore Stiffness and Concrete Cracking on Slab Construction Load”, Fracture Mechanics of Concrete and Concrete Structures (Framcos), Jeju, Korea, May, 2010.

3.         Hwang H.J., Eom T.S., and Park H.G., “Energy Dissipation of RC Interior Beam-Column Connections and Hysteresis Model”, 15 WCEE, Lisbon, Portugal, September, 2012.

4.         Hwang H.J., Eom T.S., and Park H.G., “Bond Strength of Re-bars in Interior Beam-Column Joint Under Cyclic Loading”, ICGCE, Macau, January 24-25, 2014.

5.         Hwang H.J., Eom T.S., and Park H.G., “Joint Shear Strength and Deformation Capacity Considering Bond-Slip of Rebars in RC Interior Beam-Column Connections”, The 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, July 20-23, 2014.

6.         Hwang H.J., and Park H.G., “Long-term Deflection Prediction of Flat Plate Slabs under Construction”, The 7th Asia Pacific Young Researchers & Graduates Symposium, Kuala Lumpur, Malaysia, August 20-21, 2015.

7.         Hwang H.J., and Park H.G., “Energy-based Shear Strength Prediction for Beam-Column Joints”, 2015 China-Korea Bi-lateral Workshop on Structural Behavior under Extreme Loads, Changsha, China, September 27-30, 2015.

8.         Hwang H.J., Kim S.H., and Kang T., “Energy-based Impact Resistance Model for Reinforced Concrete Members”, 2016 Korea-China Bi-lateral Workshop on Structural Behavior under Extreme Loads, Seoul, Korea, August 27-28, 2016.

9.         Hwang H.J., Kim S.H., and Kang T., “Prediction of Hard Projectile Penetration on Concrete Targets”, ACEM 16, Jeju, Korea, August 28-September 1, 2016.

10.     Hwang H.J., Kim H.J., Park H.G., Kim D.K., and Yang J.M., “Cyclic Loading Test for Prefabricated Composite Columns with Bolt-connected Steel Angles”, ICCS 19, Porto, Portugal, September 5-9, 2016.

11.     Hwang, H.J. Ma G., and Li H., “Shear Strength of Corroded Reinforced Concrete Short Columns”, SEEBUS 2017, Seoul, Korea, September 8-9, 2017.

12.     Hwang H.J., and Park H.G., “Bond Behavior of Hooked Bar and Headed Bar”, ACEM 18, Incheon, Korea, August 27-31, 2018.

13.     Hwang H.J., and Park H.G., “Development Length of Hooked and Headed Bars”, ICCEA 2018, Chengdu, China, October 27-29, 2018.

14.     Hwang H.J., and Park H.G., “Performance Based Design of Interior Beam-Column Joint”, 20th SEEBUS, Kyoto, Japan, November 2-3, 2018.

15.     Hwang H.J., “Development Length of Reinforcing Bars under Impact Load”, ACSD-EL 2018, Changsha, China, December 19-21, 2018.

16.     Hwang H.J., and Zang L., “Development Length of Reinforcing Bar under Impact Load”, BEI-2019, Honolulu, Hawaii, USA, July 22-25, 2019.

 

As a participant

1.         Lee C.H., Park H.G., Park C.H., Hwang H.J., Lee C.N., Kim H.S., and Kim S.B., “Cyclic Seismic Testing of Cruciform Concrete-Filled U-shape Steel Beam-to-H Column Composite Connection”, ISSS, Seoul, Korea, April, 2011.

2.         Lee C.H., Park H.G., Park C.H., Hwang H.J., Lee C.N., Kim H.S., and Kim S.B., “Cyclic Seismic Performance of Concrete-Filled U-shape Steel Beam to Wide Flange Column Connections”, SEEBUS, Seoul, Korea, November, 2011.

3.         Park H.G., Baek J.W., Hwang H.J., Kim J.H., and Lee J.H., “Performance of Shear Connectors in Concrete Mega Column-to-Steel Beam Connection”, 18th IABSE, Seoul, Korea, September, 2012.

4.         Park H.G., Eom T.S., Hwang H.J., and Baek J.W., “Shear Connectors for Concrete Mega Column-to-Steel Belt Truss Connections in 123-Story Lotte World Tower”, ACI 2012, Toronto, Canada, October 21-25, 2012.

5.         Park H.G., Hwang H.J., and Eom T.S., “Considerations of Bond-Slip for Performance-Based Design of RC Beam-Column Connections”, SEEBUS, Osaka, Japan, November, 2012.

6.         Park H.G., Hwang H.J., and Eom T.S., “Bond Strength Model for Beam Re-bars in Interior Beam-Column Joints”, SEEBUS, Seoul, Korea, September 19-20, 2014.

7.         Hong G.H., Hwang H.J., and Park H.G., “Structural Performance of Simplified Slab System with Deck Plate and SFRC”, 5th CONMAT, Whistler, BC, Canada, August 19-21, 2015.

8.         Kim H.J., Hwang H.J., and Park H.G., “Concentric and Eccentric Axial Load Test of Bolt-connected Prefabricated Composite Column”, 8th ISSS, Jeju, Korea, November 5-7, 2015.

9.         Lee H.J., Park H.G., Kim C.S., and Hwang H.J., “RCS Joints with Simplified Connection Details”, 8th ISSS, Jeju, Korea, November 5-7, 2015.

10.     Kim H.J., Hwang H.J., and Park H.G., “Seismic Behavior of Prefabricated Composite Columns with Bolt-Connected Steel Angles”, ACEM 16, Jeju, Korea, August 28-September 1, 2016.

11.     Lee H.J., Park H.G., Kim C.S., and Hwang H.J., “Shear Behavior of RC Column-to-Steel Beam Joints”, ACEM 16, Jeju, Korea, August 28-September 1, 2016.

12.     Kim S.H., Park H.G., and Hwang H.J., “Structural Performance of Pilotis-Wall System without Transfer Girder”, ACEM 16, Jeju, Korea, August 28-September 1, 2016.

13.     Kim H.J., Hwang H.J., Park H.G., Kim D.K., and Yang J.M., “Axial Loading Test for Prefabricated Composite Columns with Bolt-connected Steel Angles”, ICCS 19, Porto, Portugal, September 5-9, 2016.

14.     Kim H.J., Hwang H.J., and Park H.G., “Cyclic Lateral Loading Test for Prefabricated Composite Column with Bolt-Connected Steel Angles”, SEEBUS 2017, Seoul, Korea, September 8-9, 2017.

15.     Park H.G., and Hwang H.J., "Shear Strength of Interior Beam-Column Joints for Performance Based Design", ACI Fall Convention, Anaheim, USA, October 14-18, 2017.

16.     Kim S.H., Park H.G., and Hwang H.J., "Base Shear Amplification Effect of Slender RC Shear Wall", ACEM 18, Incheon, Korea, August 27-31, 2018.

17.     Zang Li, and Hwang H.J., “Effect of Impact Loading on Bar Development Length”, ICCEA 2018, Chengdu, China, October 27-29, 2018.


Patents

[1]  “Manufacturing Method for Hollow Precast Concrete-encased Steel Column”, Registration number 10-1626428, 2016.05.26.

[2]  “Dry-splicing Method for Segments of Hollow Precast Concrete-encased Steel Column”, Registration number 10-1637451, 2016.07.01.

奖励与荣誉

- 国家奖学金 (2004-2007)     韩国教育和人力资源开发部
- 特等奖 (2007)     第3届建筑结构竞赛展 - 韩国结构工程师协会
- 奖状证书 (2008)      建筑与建筑工程系优秀毕业生
- 卓越的学术表现奖学金 (2008)      建筑与建筑工程系 – 国立首尔大学
- 讲座与研究奖学金 (2010-2011)    建筑与建筑工程系 – 国立首尔大学
- 卓越的学术表现奖学金 (2011)      建筑与建筑工程系 – 国立首尔大学
- 优秀的口头报告 (2013)       韩国结构维修检验研究所
- 年轻研究员奖 (2015)       韩国混凝土协会
- 优秀教授奖 (2016)    湖南大学
- 马奎斯《世界名人录》 (2017)
- Albert Nelson Marquis终身成就奖 (2018)
- 杰出的审稿员 (2018) -工程结构

- 优秀的口头报告 (2018) - The 20th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures

- Outstanding Reviewer (2018) - Engineering Structures

- Excellent Reviewer (2019) - International Journal of Concrete Structures and Materials

- Global Peer Review Award (2019) - Top 1% reviewers in Engineering & Cross-Field